On the choice of the optimal periodic operation for a continuous fermentation process

In this contribution we investigate the impact of the forcing waveform on the productivity of a continuous bioreactor governed by an unstructured, nonlinear kinetic model. The (periodic) forcing is applied on the substrate concentration in the feed. To this end, some alternative waveforms commonly encountered in practice are evaluated and their performance is compared. An analytical/numerical approach is used. The preliminary analytical step is based on the π‐criterion that gives useful information for small amplitudes. The extension to larger amplitudes, when significant improvements are expected, is then performed through a continuation‐optimization procedure. It is found that the choice of the specific waveform has an impact on the performance of the process and there is no unique best forcing for any process condition, but its choice depends on the operating parameters and the forcing amplitude and frequency values. Further, the influence of the waveform functions on the wash‐out conditions are extensively examined. The analysis shows that all the waveforms examined in this work may lead to significant enlargement of the nontrivial regime with respect to a steady state operation. In particular, square‐wave forcing leads in practice to the extinction of the wash‐out conditions for any feed substrate concentration and for a well defined choice of the forcing parameters. © 2010 American Institute of Chemical Engineers Biotechnol. Prog., 2010     

A New Electrolyte Formulation for Securing High Temperature Cycling and Storage Performances of Na‐Ion Batteries

The Na‐ion battery is recognized as a possible alternative to the Li‐ion battery for applications where power and cost override energy density performance. However, the increasing instability of their electrolyte with temperature is still problematic. Thus, a central question remains how to design Na‐based electrolytes. Here, the discovery of a Na‐based electrolyte formulation is reported which enlists four additives (vinylene carbonate, succinonitrile, 1,3‐propane sultone, and sodium difluoro(oxalate)borate) in proper quantities that synergistically combine their positive attributes to enable a stable solid electrolyte interphase at both negative and positive electrodes surface at 55 °C. Moreover, the role of each additive that consists in producing specific NaF coatings, thin elastomers, sulfate‐based deposits, and so on via combined impedance and X‐ray photoelectron spectroscopy is rationalized. It is demonstrated that empirical electrolyte design rules previously established for Li‐ion technology together with theoretical guidance is vital in the quest for better Na‐based electrolytes that can be extended to other chemistries. Overall, this finding, which is implemented to 18 650 cells, widens the route to the rapid development of the Na‐ion technology based on Na₃V₂(PO₄)₂F₃/C chemistry.     

Optimizing the expression of chimeric genes in plant cells

Summary The Serratia marcescens chiA gene encodes a secreted chitinase activity which contributes to the fungal growth inhibition exhibited by this bacterium. The coding region from the chiA gene was fused to the promoter and 3 polyadenylation region of the Agrobacterium nopaline synthase gene. Site-directed mutagenesis of specific nucleotides surrounding the initiating AUG of the coding sequence of this chimeric gene resulted in up to an eight-fold increase in the amount of chitinase protein detected in transformed plant tissue. Analysis of the chiA mRNA indicated that these nucleotides also affected mRNA levels. At least 50% of the chitinase protein produced in transformed tobacco cells was the same molecular weight as the S. marcescen secreted protein.     

The cell wall-plasmalemma interface in sieve tubes of barley

Both thick- and thin-walled sieve tubes in leaf-blade veins of Hordeum vulgare L. exhibit a distinct, electron-opaque inner wall layer after fixation in glutaraldehyde-osmium tetroxide and staining with uranyl acetate and lead citrate. This inner wall layer is thickest at the sieve plates and lateral sieve areas where it is permeated by a labyrinth of tubules formed by the plasmalemma. Along the lateral walls between sieve areas the inner wall layer apparently is penetrated by numerous microvilli-like evaginations of the plasmalemma, giving the cell wall-plasmalemma interface the appearance of a brush border. It is suggested that a similar brush-border-like structure may occur at the cell wall-plasmalemma interface of sieve elements in a wide variety of vascular plants.Abbreviation ER endoplasmic reticulum     

Preparative resolution of some 5,5-hydantoin derivatives via formation of diastereoisomeric salts

Several preparative resolutions of 5,5-disubstituted hydantoins have been achieved via fractional crystallization of diastereoisomeric salts. The process can be extended by making use of the difference between the variation of solubilities of the hydantoins and their salts with α-methylbenzylamine as a function of the alkalinity of the medium. Optimization for each resolution procedure involves a refinement of the excess amount of base needed. © 1992 Wiley-Liss, Inc.     

A new device for collection of interstitial water from wetland sediments

A sampler for collection of interstitial water from wetland sediments is described. It differs from other sampling devices because it does not have to be filled with solution to facilitate diffusion, it does not have to be removed from the wetland to collect samples, and it can be used to draw repeated samples over time from identical locations. The device facilitates in situ measurement of a wide range of abiotic parameters such as electrical conductivity, redox potential, and pH in wetland sediments. The device has application in ecological investigations of sediment-borne wildlife diseases, studies of benthic invertebrates, measurement of nutrient exchange, and other aspects of wetland ecology.     

Studies on graft unions

Summary The occurrence of plasmodesmata in the graft interfaces of two heteroplastic grafts (Impatiens walleriana onImpatiens olivieri andHelianthus annum onVicia faba) has been studied. For both systems two types of intercellular strand are described: 1. Continuous plasmodesmata interconnecting the cells of stock and scion and 2. half plasmodesmata traversing the wall part of one partner cell without connection to the abutting cell. Single strands or branched forms occur in both types of plasmodesma. In the case of half plasmodesmata, branchings with extended median nodules predominate. The distribution of half and continuous plasmodesmata varies with the different areas of a graft interface: in the region of bridging vascular tissues most cell connections are continuous. In areas where cortex or pith-derived callus cells and those of misaligned tissues (cortex/vascular tissue; cortex/pith; pith/vascular tissue) match, discontinuous strands predominate.Branched half plasmodesmata also occur in presumably fused walls between related callus cells; they are typical structures secondarily formed in non-division walls.The results are discussed with regard to compatibility/incompatibility phenomena in heterografts and the development and function of interspecific cell bridges.     

A user-friendly biological workstation

Learning methods developed by artificial intelligence research teams are very efficient for biological sequences analysis but they need running on large computers accessed by terminals. These computers are interfaced with standard displays involving long and unpleasant alphanumerical data handling. The "biological work station" is a personal computer with a color graphic screen providing a user-friendly interface for the artificial intelligence learning programs running on large computers. It provides to biologist a graphical convenient tool for sequence analysis built with efficient man-machine communication methods such as multiwindows, icons and mouse selection. It allows the biologist to edit and display sequences in an efficient and natural way, showing off directly on color pictures the data and the results of learning programs.     

On the oscillatory phenomenon in an oil/water interface

A simple theoretical model is presented for simulating the self-sustained oscillations of electric potential and pH at an oil/water interface appearing in a two-phase system composed of 2-nitropropane solution containing picrate acid and an aqueous solution of cetyltrimethylammonium bromide. In the present model, a well-known condition necessary for the occurrence of self-sustained oscillations, i.e., the presence of a positive feedback process far from equilibrium, is taken into account in a set of kinetic equations to describe simplified characters of the following two processes: (i) a cooperative formation of ion pair complexes at the interface, and (ii) supply of picrate anions and cetyltrimethylammonium cations to the interface accompanied by release of ion pair complexes to the organic phase. The numerical solutions of the present equations are shown to reproduce fairly well the characteristic properties of the oscillation of electric potential and pH such as wave forms and frequencies.